Call Us Toll Free At 1-800-843-6036

ON LINE ORDER

MORE VIDEO SOLUTIONS FOR TWISTED PAIR

EMAIL US

MidSouthCable.com Home Page

TWISTED PAIR CAT 5 VIDEO COMPONENT SYSTEMS & HUBS

TWISTED PAIR VIDEO COMPONENT SYSTEMS & HUBS
Video Balun Transceivers for twisted pair up to 1,000 feet.Video Balun Transceivers for twisted pair up to 1,000 feet.  Two types are available.  The basic VB37 model and the VB 39 with built-in surge suppression for added equipment protection.

Video Balun Transceiver is a video transmission device that provides a low cost means of sending live video over unshielded twisted pair, point-to-point wiring for distances of up to 1,000 feet.  The VB37 and VB39 are compatible with all of the "up-the-coax" control systems.  A basic system uses (2) VB37 or (2) VB39 units, one at each end of a twisted pair of wires.  These units are intended for use over existing in house telephone wiring, Category 5 wiring or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax.  The VB37 and VB39 are designed to provide superior immunity from noise and interference even when running next to line power!

 

 

Ordering and Pricing Information
Part Description 1+ 3+
VB37F Female BNC Connector, up to 1,000 feet $66.34 $62.00
VB37M Male BNC Connector, up to 1,000 feet $66.34 $62.00
VB39F Female BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VB39M Male BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
Applications: 
  • Intra-building CCTV installations (instead of coaxial cable)
  • Structured cabling (CAT 5) environments
  • To eliminate requirement for Plenum Coax
  • Multi-camera applications through conduit (more cameras through a smaller diameter)
Holds upl to 10 Model VB37M or VB39M Video Balun Transceivers.

The Model RK115 Rack Panel provides a convenient and cost-effective means to mount up to 10 Model VB37M or VB39M Video Balun Transceivers.  While the RK115 is designed for used with a standard 19" rack cabinet, it can be easily adapted for wall mounting, providing a convenient way to mount and organize units and cable.  Model VB37M and VB39M Transceivers (not included) connect directly to the RK115 by means of BNC type connectors.  No power is required for the RK115 or VB37M and VB39M Video Balun Transceivers.

 

Ordering and Pricing Information
Part Description 1+ 3+
RK115 Standard 19" Rack Panel $105.93 $99.00

 

Two types of Transceivers are available: The basic VB37 model and the VB39 with built-in surge suppression for added equipment protection.

 

 

Rack Panel for use with VB37M or VB39M Video Balun Transceivers fits standard 19" rack cabinet.

4 Port UTP Video Mini-Hub; up to 1,000 ft. with passive transceivers; up to 3,000 ft. with active transceivers.

The VH439 Video Balun Mini-Hub is a multi-channel video transmission device that provides a low cost means of sending quality live video over category UTP cabling.  The system can also adapt to existing communication and computer network spare pairs.  The VH439 can send video up to 1,000 feet when used with other products in the VB37 or VB39 family (750 feet when used with DVR equipment).  When used with model TR515 or TR560 active receivers, distances of 1,500 feet and 3,000 feet respectively can be attained.  The VH439 is designed to provide superior immunity from noise and interference, such as RFI and EMI.

 

Ordering and Pricing Information
Part Description 1+ 3+
VH439 4 Port UTP Video Balun Mini-Hub w/surge suppression; up to 1,000 ft. $342.40 $320.00
VB43F BNC Female Video Balun/Combiner w/surge suppression; up to 1,000 ft. $81.32 $76.00
TR515 Active Receiver w/surge suppression; up to 1,000 ft. $211.86 $198.00
TR560 Active Receiver w/surge suppression; up to 3,000 ft. $509.32 $476.00
VB41x4 4 Balun Card w/surge suppression for Rack; up to 1,000 ft. $470.80 $440.00
TR515x4 Active Receiver w/surge suppression for rack; up to 1,500 ft. $1,127.78 $1,054.00
TR560x4 Active Receiver w/surge suppression for Rack; up to 3,000 ft. $1,579.32 $1,476.00
VH1639 16 Port UTP Video Balun Hub w/surge suppression; up to 1,000 ft. $1,658.50 $1,550.00
VH1651 16 Port Active UTP Receiver Hub w/surge suppression; up to 1,000 ft. $3,424.00 $3,200.00
VH1656 16 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 ft. $4,598.86 $4,298.00
Applications:
  • Structured cabling environments
  • Multi-camera applications through conduit (more cameras through a smaller diameter)
  • Combining mid-span video runs into a single cable

 

Two VB37 or VB39 devices M or F in any combination are required for transmission over a single UTP.

 

Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring.

 

Recommended Transmission Distance w/passive units - up to 1,000 feet; w/active units - up to 3,000 feet.

 

 

Video Format - RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)

 

Wire Size - 26 to 12 AWG Unshielded Twisted Pair

 

8, 16 or 32 Port Video Balun Hubs with built-in surge suppression.

 

The VH839, VH1639 and VB3239 Video Balun Hubs are multi-channel video transmission devices that provide a low cost means of sending quality live video over Category UTP cabling.  The systems can also adapt to existing communication and computer network spare pairs, or new cable installations.  The VH839, VH1639 and VH3239 can send video up to 1,000 feet when used with other products in the VB37 or VB39 family (750 feet when used with DVR equipment).  When used with model TR515 or TR560 active receivers, distances of 1,500 feet and 3,000 feet, respectively, can be attained.  The VH839, VH1639 and VH3239 are designed to provide superior immunity from noise and interference, such as RFI and EMI.

Ordering and Pricing Information

Part Description 1+ 3=
VH839 8 Port UTP Video Balun Hub w/surge suppression; up to 1,000 ft. $853.86 $798.00
VH1639 16 Port UTP Video Balun Hub w/surge suppression; up to 1,000 ft. $1658.50 $1,550.00
VH3239 32 Port UTP Video Balun Hub w/surge suppression; up to 1,000 ft. $3,255.00 $3,100.00
VH839 or VH1639 work with the following NITEX equipment
VB37M Male BNC Connector, up to 1,000 feet $66.34 $62.00
VB37F Female BNC Connector, up to 1,000 feet $66.34 $62.00
VB39M Male BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VB39F Female BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
TR515 Active Receiver w/surge suppression; up to 1,000 ft. $211.86 $198.00
TR560 Active Receiver w/surge suppression; up to 3,000 ft. $374.50 $350.00
VB41x4 4 Balun Card w/surge suppression for Rack; up to 1,000 ft. $470.80 $440.00
TR515x4 Active Receiver w/surge suppression for rack; up to 1,500 ft. $1,127.78 $1,054.00
TR560x4 Active Receiver w/surge suppression for Rack; up to 3,000 ft. $1,579.32 $1,476.00
VH439 4 Port UTP Video Balun Mini-Hub w/surge suppression; up to 1,000 ft. $342.40 $320.00
VH851 8 Port Active UTP Receiver Hub w/surge suppression; up to 1,500 ft. $1,926.00 $1,800.00
VH1651 16 Port Active UTP Receiver Hub w/surge suppression; up to 1,000 ft. $3,424.00 $3,200.00
VH856 8 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 ft. $2,354.00 $2,200.00
VH1656 16 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 ft. $4,598.86 $4,298.00

8, 16 or 32 Port Active Video Hubs with built-in surge suppression, ground loop isolation, gain and loss control, and video detection.

These Active Video Hubs are multi-channel video receiver devices that provide a low cost means of receiving quality live video over category UTP cabling.  The systems can also adapt to existing communication and computer network spare pairs, or new cable installations.  The VH851, VH1651 or VH3251 can receive video up to 1,500 feet when used with passive transmitters.  The VH856, VH1656 or VH3256 can be used on video runs up to 3,000 feet when used with passive transmitters, or distances of up to 6,000 feet with the Nitek TT560 active transmitter.  These Hubs provide superior immunity from noise and interference, even when run in common raceways with AC.

Ordering and Pricing Information
Part Description 1+ 3+
VH851 8 Port Active UTP Receiver Hub w/surge suppression; up to 1,500 feet $1,926.00 $1,800.00
VH1651 16 Port Active UTP Receiver Hub w/surge suppression, up to 1,500 feet $3,424.00 $3,200.00
VH3251

32 Port Active UTP Receiver Hub w/surge suppression; up to 1,500 feet

$6,848.00 $6,400.00
VH856 8 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 feet $2,354.00 $2,200.00
VH1656 16 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 feet $4,598.86 $4,298.00
VH3256 32 Port Active UTP Receiver Hub w/surge suppression; up to 3,000 feet $9,197.72 $8,596.00
The following Nitek equipment works with the above:
VB37M Male BNC Connector, up to 1,000 feet $66.34 $62.00
VB37F Female BNC Connector, up to 1,000 feet $66.34 $62.00
VB39M Male BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VB39F Female BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VB41x4 4 Balun Card w/surge suppression for Rack; up to 1,000 ft. $470.80 $440.00
VH439 4 Port UTP Video Balun Mini-Hub w/surge suppression; up to 1,000 ft. $342.40 $320.00
VH839 8 Port UTP Video Balun Hub w/surge suppression; up to 1,000 feet $853.86 $798.00
VH1639 16 Port UTP Video Balun Hub w/surge suppression; up to 1,000 feet $1,658.50 $1,550.00
TT560 Active Transmitter w/surge suppression; up to 6,000 feet $509.32 $476.00

8, 16 Port or 32 Port Active UTP Video Hubs; Power requirements 24 VAC (Wall transformer provided with unit).

 

Live video transmission for operation over twisted pair or Cat 5 cables.

Both the TR515 and TR560 are designed for operation over Category 2, 3, 4 or 5 twisted pair cable and require the use of a NITEK transmitter unit.  The units work equally well over existing communication and computer network spare pairs, or new cable installations.  Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with virtually no loss.  A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be "fine-tuned" for any cable.  This unique feature provides easy adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs.

The TR515 and TR560 include the receiver and a power supply for the receiver.  Complete systems including the receiver, transmitter and power supplies are available.  For more information refer to the Ordering and Pricing Information Chart below.

Ordering Information and Pricing Chart
Part Range in Feet System Includes 1+ 3+
TR515 100 to 1,500 Receiver & Power Pack $211.86 $198.00
TS515 100 to 1,500 VB37F, TR515 & Power Pack $297.46 $278.00
TR560 100 to 6,000 Receiver & Power Pack $374.50 $350.00
TS560 100 to 3,000 VB37F, TR560 & Power Pack $460.10 $430.00
TT560 500 to 6,000 Transmitter & Power Pack $509.32 $476.00
EX560 500 to 6,000 TT560, TR560 & (2) Power Packs $883.82 $826.00
Applications:
  • Elevators - making traveling coax unnecessary
  • High Rise Buildings - between floors, through punch-down blocks
  • Detention Facilities - using existing communication wiring
  • High Voltage Facilities - high immunity to AC power interference
  • Parking Garages - where running coax is difficult to impossible

Receiver Unit Power Requirements:  12 to 24 VAC or VDC @ 30mA (wall transformer provided with unit).

 

Live video transmission for operation over twisted pair or Cat 5 cables up to 6,000 feet.

The TT560 is designed for operation over Category 2, 3, 4 or 5 twisted pair cable and requires a NITEK active receiver unit.  The units work equally well over existing communication and computer network spare pairs or new cable installations.  A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network.  In addition, the transmitter is virtually impervious to ground loop and has high immunity to noise and interference from other signals.  Built-in surge suppression is standard.

A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be "fine-tuned" for any cable.

The TT560 includes the transmitter and a power supply for the receiver.  Complete systems including the receiver, transmitter and power supplies are available.  For more information refer to the Ordering Information Pricing Chart below.

Ordering Information and Pricing Chart
Part Range in Feet System Includes 1+ 3+
TT560 500 to 6,000 Transmitter and Power Pack $509.32 $476.00
TR560 100 to 6,000 Receiver and Power Pack $374.50 $350.00
EX560 500 to 6,000 TT560, TR560 and (2) Power Packs $883.82 $826.00
TR560x4 500 to 6,000 Receiver, Card for Modular System $1,579.32 $1,476.00
EX560x4 500 to 6,000 (4) TT560, TR560x4 and (4) Power Packs $3,616.60 $3,380.00
EX560 500 to 6,000 TT560, TR560 & (2) Power Packs $883.82 $826.00
Applications:
  • Elevators - making traveling coax unnecessary
  • High Rise Buildings - between floors, through punch-down blocks
  • Detention Facilities - using existing communication wiring
  • High Voltage Facilities - high immunity to AC power interference
  • Parking Garages - where running coax is difficult to impossible

 

Recommended Transmission Distance up to 6,000 feet for both monochrome and color.

 

Live video transmission system for operation over twisted pair, Cat 5, Cat 6 or Cat 7 cables.

The EX1120 is a complete Twisted Pair Video system made up of a TR1120 receiver unit and a TT1120 receiver unit.  The system is designed to operate over Category 2, 3, 4, 5, 6 or 7 twisted pair cable.  It works well over existing communication, computer network spare pairs, or new cable installations.  A highly balanced transmitter output assures that the system will not interfere with other network equipment.  Advanced receiver and transmitter electronics provide optimum video quality and complete immunity from ground loop, hum and noise.  Both the transmitter and receiver provide adjustment for gain and frequency compensation allowing the system to be "fine-tuned" for the cable.  These unique adjustments provide optimum performance over the entire operating range of the system and allow cable lengths to be estimated with a wide safety margin.  The receiver and transmitter units each require 24 VAC power.  In multiple receiver and/or transmitter applications a common supply can be used for the system.
Ordering Information and Pricing Chart
Part Description 1+ 3+
EX1120 Applications of 1,000 ft (304m) to 12,000 ft (3.65Km) $1,871.43 $1,749.00
Applications:
  • Large Campus Installations
  • Shopping Malls
  • Airports
  • High Voltage Facilities
  • Traffic Around City Areas
  • Remote Gates

Recommended Transmission Distances:  Monochrome - 1,000 ft. to 12,000 ft.; Color - 1,000 ft. to 9,000 ft.

 

Audio transmission system for operation over ordinary twisted pair cable.

The AS1000 is an audio link system that provides a low cost method of sending Line Level audio over twisted pair, point to point wiring for distances of up to 2 miles.  The AS1000 includes two bi-directional modules and can be used over existing in-house telephone wiring, leased lines or other twisted pair cables, such as Category 5.  The AS1000 can also be used as an audio companion product for the NITEK twisted pair and leased line video transmission systems.

AS1000 modules can be rack mounted using a model RK100 rack panel to hold up to 10 modules per panel (RK100 sold separately).

Ordering Information and Pricing Chart
Part Description 1+ 3+
AS1000 Line Level Audio Transmission System $214.00 $200.00

AS1000 modules can be rack mounted using a model RK-100 rack panel to hold up to 10 modules per panel (RK100 sold separately).

Call Us Toll Free At 1-800-843-6036

ON LINE ORDER

MORE VIDEO SOLUTIONS FOR TWISTED PAIR

EMAIL US

MidSouthCable.com Home Page

Prices Subject to Change Without Notice.

Product Design and Specifications Subject to Change Without Notice.

Visit midsouthelectronics.com for more electronic solutions