Call Us Toll Free At 1-800-843-6036

ON LINE ORDER

MORE VIDEO SOLUTIONS FOR TWISTED PAIR

EMAIL US

MidSouthCable.com Home Page

NITEK TWISTED PAIR VIDEO MODULAR SYSTEM

NITEK TWISTED PAIR VIDEO MODULAR SYSTEM

The VB41x4 Modular Card is designed for use with the Modular Rack System.  Each card has 4 Video Balun units, built-in surge protection and video loss protection.The NITEK Video Baluns are transmission devices that provide a low cost means of sending live video over unshielded twisted pair, point-to-point wiring for distances of up to 1,000 feet (750 feet when used with DVR equipment).  The NITEK Video Baluns are also compatible with all of the "up-the-coax" control systems.  A basic system would require one unit at each end of a twisted pair of wires.  The NITEK Video Baluns are intended for use over existing in house telephone wiring, Category 5 wiring or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax.  NITEK Video Baluns are designed to provide immunity from noise and interference, even when running next to line power!

The VB41x4 plugs into the RK400 Card Cage, which holds up to ten (10) Modular cards.  The RK400 Card Cage is a powered card cage that accepts the full line of NITEK receiver units.  This modular "plug-in" feature allows the system to be custom configured for each application and provides easy expandability.

A feature of the VB41x4 is the quality video over ordinary twisted pair cable.

 

Ordering and Pricing Information
Part Description 1+ 3+
VB41x4 Applications up to 1,000 feet; 4 videos per card $470.80 $440.00
RK400 Modular Rack Cabinet with power supply $587.43 $549.00
Applications:
  • Applications:
    • Elevators - making traveling coax unnecessary
    • High Rise Buildings - between floors, through punch-down blocks
    • Detention Facilities - using existing communication wiring
    • Campus Facilities - where running coax or fiber is difficult and expensive

     

 

TR515x4 and TR560x4 receivers will also operate with all models of twisted pair-equipped cameras.The TR515x4 and TR560x4 Modular Cards are designed for use with the Modular Rack System.  The system holds up to ten (10) modular cards in any combination, using the RK400 card cage (not included).  This modular "plug-in" feature allows the system to be custom configured for each application and provides easy expandability.

Both the TR515x4 and TR560x4 are designed for operation over category 2, 3, 4 or 5 twisted pair cable.  The systems work equally well over existing communication and computer network spare pairs or new cable installations.  A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network.  Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with minimum loss.  A dip switch on the receiver unit provides incremental adjustment of gain and frequency compensation to allow the system to be "fine-tuned" for an existing cable.  This unique feature provides adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin.  The TR515x4 and TR560x4 include only the receiver card.  See the Ordering and Pricing Information chart below for transmitter units.

TR515x4 UTP transmission up to 1,500 ft.  TR560x4 UTP transmission up to 3,000 ft; up to 6,000 ft. with active transmitters.Note:  TR515x4 and TR560x4 Receiver Cards mount in RK400 Card Cage (sold separately).  The RK400 can hold up to 10 modular cards in any combination.  VB39F and TT560 transmitters sold separately.

 

Ordering and Pricing Information
Part Description 1+ 3+
TR515x4 Quad Receiver Card, up to 1,500 ft. $1,127.78 $1,054.00
TR560x4 Quad Receiver Card, up to 3,000 ft. $1,579.32 $1,476.00
TS515x4 Quad UTP Transmission System, up to 1,500 ft. $1,127.78 $1,054.00
TS560x4 Quad UTP Transmission System, up to 3,000 ft. $1,597.34 $1,476.00
RK400 Modular Rack Cabinet with power supply $587.43 $549.00

 

 

Modular UTP Video Hub System: VH3200, Powered Card Cage, VB41x8 Video Balun Transceiver Card, TR515x8 Active Video Receiver Card, TR560x8 Active Receiver Card

Up to 32 Port Powered Video Hub with built-in surge suppression and video detection.  Systems operate with other NITEK UTP video equipment including, Video Transceiver Hubs, standard Video Balun Transceivers, Active Transmitters, or any Twisted Pair Equipped Camera.

The VH3200 series UTP Modular Hub system holds up to four VB41x8, TR515x8 or TR560x8 8 channel video receiver cards in any combination, for a total of 32 input ports.  The VB41x8 can be used on video runs up to 1,000 feet (750 feet when used with DVR equipment).  The TR515x8 can be used up to 1,500 feet with passive transmitters.  The TR560x8 can be used up to 3,000 feet with passive transmitters an dup to 6,000 feet with the NITEK TT560 active transmitter.

 

 

 

Power requirements: 24 VAC (Wall transformer provided with unit)

 

Ordering and Pricing Information
Part Description 1+ 3+
VH3200 32 Port Powered UTP Receiver Hub holds up to 4 cards $587.43 $549.00
VH41x8 8 channel UTP Balun card w/video detection; up to 1,000 ft. $800.36 $748.00
TR515x8

8 channel UTP Active receiver card w/video detection; up to 1,500 ft.

$1,872.50 $1,750.00
TR560x8 8 channel UTP Active receiver card w/video detection; up to 3,000 ft. $2,299.43 $2,149.00
The following Nitek equipment works with the above:
VB37M Male BNC Connector, up to 1,000 feet $66.34 $62.00
VB37F Female BNC Connector, up to 1,000 feet $66.34 $62.00
VB39M Male BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VB39F Female BNC w/surge suppression; up to 1,000 feet $96.30 $90.00
VH439 4 Port UTP Video Balun Mini-Hub w/surge suppression; up to 1,000 ft. $342.40 $320.00
VH839 8 Port UTP Video Balun Hub w/surge suppression; up to 1,000 feet $853.86 $798.00
VH1639 16 Port UTP Video Balun Hub w/surge suppression; up to 1,000 feet $1,658.50 $1,550.00
TT560 Active Transmitter w/surge suppression; up to 6,000 feet $509.32 $476.00

 

A feature of the EX1120RR is the active electronics compensate for frequency and level losses over the length of the cable.The EX1120RR is a single channel unshielded twisted pair (UTP), long range transmission system designed for use with the Modular Rack System.  The Modular Rack System holds up to ten (10) modular cards, in any combination, using the Modular Card Cage (not included).  Cards may be inserted in various combinations of video and data cards.  This plug-in feature allows the system to be custom configured for each application and provides ability for future expansion.

The EX1120RR is a complete system comprised of a TR1120RR Modular Receiver and a TT120 Standard Transmitter unit.  The system is designed for operation over category unshielded twisted pair cabling.  It can also adapt to existing communication, computer network spare pairs or new cable installations.  A highly balanced transmitter output assures that the system will not interfere with other network equipment.  Advanced receiver and transmitter electronics provide optimum video quality and complete immunity from ground loop, hum and noise.  Both the transmitter and receiver units provide adjustments for gain and frequency compensation, allowing each system to be "fine-tuned" to the cable.  These unique adjustments provide optimum performance over the entire operation of the system.

A feature of the EX1120RR is the active electronics compensate for frequency and level losses over the length of the cable.

 

Ordering and Pricing Information
Part Description 1+ 3+
EX1120RR Applications of 1,000 ft. (304m) to 12,000 ft (3.65Km)    
RK400 Modular Rack Cabinet with power supply $587.43 $549.00
Applications:
  • Large Campus Installations
  • Shopping Malls
  • Airports
  • High Voltage Facilities
  • Traffic and Security Around City Areas
  • Remote Gates

 

The DA422 Data Distribution Card is designed for use with the Modular Rack System for distances up to 6,000 feet.The DA422 Data Distribution Card is designed for use with the Modular Rack System for distances up to 6,000 feet.

The Modular Rack system holds up to ten (10) modular cards.  Cards may be inserted in various combinations of video and DA422 cards.  The maximum allowable number of DAA422 cards per Modular Rack is four (4).

The DA422 is designed for use over Category unshielded twisted pair (UTP) cabling.  The DA422 functions as a RS422 distribution card.  RSE422 control signals from a controller, matrix, etc. are connected to the input of the DA422 and four (4) signals are available for distribution to multi-points at the output either using an RJ45 modular connector or screwless pushs terminals.  The system can also adapt to existing communication cables, computer network spare pairs or new cable installations.  The balanced output design of the DA422 insures that the system will not interfere with other equipment on the network.

 

Ordering and Pricing Information
Part Description 1+ 3+
DA422 RS422 Data Distribution Card; 1 In - 4 Out $639.86 $598.00
RK400 Modular Rack Cabinet with power supply $587.43 $549.00
Applications:
  • Extending keyboard operation for point to multi-point control
  • Operation in structured cabling environments
  • Providing RS422 control, extension and distribution for remote cameras

 

RK400 Modular Card Cage for 19" rack cabinet; for Powered Twisted Pair video systems

This diagram is a simplified model to show some of the components used in an RK400 system.

 

 

Ordering and Pricing Information
Part Description 1+ 3+
RK400 Modular Rack Cabinet with power supply $587.43 $549.00

Call Us Toll Free At 1-800-843-6036

ON LINE ORDER

MORE VIDEO SOLUTIONS FOR TWISTED PAIR

EMAIL US

MidSouthCable.com Home Page

Prices Subject to Change Without Notice.

Product Design and Specifications Subject to Change Without Notice.

Visit midsouthelectronics.com for more electronic solutions