Perimeter Protection Fence Security System Systems Outdoor Electronic Intrusion Detector Detection System Systems. This Perimeter Intrusion Detection Fence Security System is ideal for outdoor protection and can be easily installed on fences, on a concertina razor coil on a roofs and solid walls or for indoor use to protect vaults, strong rooms etc.

An electronic processor that continuously monitors the cable signal output and detects any attempt to penetrate the perimeter.

The analyzer is designed to ignore signals generated by rain, wind or birds. It utilizes highly advanced microprocessor technology in a microprocessor and is installed inside an IP65 rated weatherproof box.

The analyzer scans the integrity of the sensor line, thus monitoring the terminal that has been integrated to the cable. If the cable is cut, damaged or interfered in any way, the analyzer will immediately detect it, and activate a warning signal.

The 827382LPU-303*  is design to control up to two zones of 305m (1000Ft). The analyzer is equipped with build in communication and relay output for fully integration and meteorological outputs for Weather Compensation Unit.

The Perimeter Security System Dual Zone

The signal processor receives and analyzes the signals generated by the ironclad sensor cable and detects minute vibrations in the fence.

The sensor has independent adjustments and thresholds for each type of intrusion and the processor identifies, by type whether a cut intrusion or climb intrusion has occurred.

This perimeter security system includes several main components:

The perimeter security system Sensor Cable is attached to the desired-to-protect structure (fence/wall), converting the whole structure into a gigantic vibration of high fidelity, which will detect any kind of intrusion. The electric output of this cable is a highly accurate reproduction of all sounds, generated by the fence/wall.

The perimeter security system Sensor Line Cable has a life expectancy of 10 years, is easy to install and non obstructive to the eye. This cable is attached directly to the fence with cable ties.

The sensor is totally passive and has different ranges of sensitivity that will allow adapting it to any specific application.

The zone starts at the electronic processor (Analyzer) and ends at the MCT- End Line protection module.

The basic Ironclad/MICALERT is a single zone system. The kit contains a single zone LPU-303 Analyzer unit with a single dry contact output, one carton roll of sensor cable 1,000' (305m), one MCT End-of-Line Termination Module which is built-in the sensor cable and a package of 610 cable ties.

This configuration will secure a total perimeter length of up to 2,000' (610m) using one 827382LPU-303*  Dual Analyzer unit. The detection zones must be continuous with no gaps between the individual zones.

 Gas Discharge Devices on all Inputs/Outputs & Communication line.

 Dry contact relays with N.O. and N.C. contacts rated 1A @ 12VDC.

 Alarm output via Ethernet TCP/IP.

 Alarm output via RS-485 Protocol.

 Alarm Relay Status LED.

 Tamper Indication LED.

 9.5 x 7.5 x 2.75" (24 x 19.5 x 7.0cm)

 Weight: 2.2 lbs (1Kg)

 Diameter: 0.118" (3mm)

 Color: Black

 UV resistant cable ties (610 per Zone)

Outdoor weatherproof Enclosure Box ultrasonic welded to the detection sensor line.

 Relative Humidity up to 98% non-condensing.

 RS485: Intrudalert 5500 Protocol

 VX-25: Weather Compensation Unit

 Armored Conduit: Vandal Resistant