Figure-8 Figure 8 Figure8 Aerial Duct Innerduct  HDPE for aerial applications highway water crossings building to building. Strand-Guard® Solid Wall Figure-8 aerial duct has added defense against rodent damage and gun shot shots pellets. Outdoor  pathway for easy fiber optic optical power or coax coaxial wire cable wires cables wiring cabling.  Outdoor conduit.

midsouthcable.com midsouth wire and cable company

Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.

Strand-Guard® Solid Wall Figure 8

added defense against rodent damage and gun shot pellets

 Features & Benefits
  • "Figure 8" construction with extra high strength (EHS), flooded galvanized support strand for one-step aerial placement
  • Duct sizes 1-1/4" (32mm) and 2" (51mm)
  • HDPE duct has carbon black and antioxidants for maximum  UV and thermal protection
  • Available with co-extruded Silicore permament lining
  • Fits standard serpentine clamp
  • Sequential markings in feet or meters

 

 GENERAL INFORMATION

Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.
 

EMAIL OR CALL US FOR PRICING AND AVAILABILITY

1-800-843-6036

Click Here to Email Us

    OnLine Order

Supported Browsers IE, SAFARI, CHROME

More Innerduct & A-D Technologies Products

Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.

Figure-8 Figure 8 Figure8 Aerial Duct Innerduct  HDPE for aerial applications highway water crossings building to building. Strand-Guard® Solid Wall Figure-8 aerial duct has added defense against rodent damage and gun shot shots. Outdoor  pathway for easy fiber optic optical power or coax coaxial wire cable wires cables wiring cabling.

 

 

More OUTSIDE Plant Premise Specialty Innerduct HDPE Conduit Buried Duct
locate trace duct innerduct conduit PINPOINT® is a proven, reliable method for locating buried duct. The PINPOINT® wire is encased in HDPE providing a corrosion-resistant conductor. Ideal for plow, open trench or directional bores. It is extremely functional at a wide range of frequencies, compatible with industry standard locating equipment. No special tools are required to couple the duct and the PINPOINT® wire - current coupling methods can be utilized.

PINPOINT®  LOCATED BURIED DUCT

Aerial Drop duct designed for aerial applications, highway or water crossings, building to building, pole to house, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. Increase bandwidth to the home and small business with Aerial Drop Duct. Lightweight, self-supporting and small enough for pole-to-home use. Perfect for easy one-step placement of fiber optics, copper cable or coax applications with a permanent protected pathway for future cable upgrades or repairs.Aerial Drop duct is manufactured from the highest quality HDPE materials and ontains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment

Aerial Drop Duct

 

FLEX-COR AERIAL CONDUIT FIGURE 8 AERIAL CONDUIT duct figure-8 innerduct outside Minimize your aerial installation and maintenance costs with FlexCor. Strand-Guard Figure-8 is ideal for use in limited access areas such as water crossings, interstate highway crossings or in heavily wooded areas where additional cable protection is necessary. The conduit design permits easy, straight payoff for direct placement onto the pole line and allows greater flexibility for future access to the cable. Standard pole mounting hardware and A-D Technologies' Split-Lock coupler are recommended for quick, airtight installation. No special expansion couplings are necessary, as the corrugated inner liner relieves the mechanical strain caused by extreme temperature changes.

FLEX-COR AERIAL CONDUIT  FIGURE 8 AERIAL CONDUIT

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160. Protect fiber optic fiber-optic wire cable wires cables can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls. Duct conduit for fiber optic optics optical wire cable

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160.

can be direct buried and is frequently used for short runs.

Corrugated product is commonly used as an innerduct for short pulls.

 

innerduct duct conduit Fiber-Guard® Flex-Cor is a jacketed corrugated

Fiber-Guard® Flex-Cor is a jacketed corrugated
conduit designed for above ground installations

Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.

Strand-Guard® Solid Wall Figure 8

added defense against rodent damage and gun shot pellets

Fiber-Guard® Flex-Cor is a jacketed-corrugated conduit designed for above ground installations in conduit or raceways on bridges or lashed to existing aerial plant. Fiber-Guard® Flex-Cor is also ideally suited for use in direct buried transition locations or for buried services. The Fiber-Guard® Flex-Cor jacketed-corrugated design and material properties compensate for the stresses of expansion and contraction, eliminating the need for special expansion sleeves. Fiber-Guard® Flex-Cor is made of a specially formulated polyethylene resin that resists the adverse effect of sunlight assuring long life in above ground installations. The standard product is available in 1", 1-1/4", 1-1/2" and 2' diameters. The internal corrugated wall can be provided in colors for rapid route identification when installing the cables. The outer jacket is fused to the inner corrugated wall so the assembly performs as a single conduit during installation.

FIBER-GUARD FLEX-COR - FLEXIBLE CORRUGATED JACKETED CONDUIT

 conduit duct innerduct arnco duraline ad technologies Flex-Cor's dual wall construction has excellent tensile/crush resistance permitting long pulls as well as making it strong enough for use in direct buried transitions or for buried services.

 

FIBER-GUARD FLEX-COR - FLEXIBLE CORRUGATED JACKETED CONDUIT

 

Fiber-Guard® Slit is a corrugated slit conduit for use where additional protection and identification is required, such as in underground handholes. Available in bright orange color for rapid identification or aerial (UV formulated) black for use in areas where exposure to sunlight will occur. Fiber-Guard Slit is manufactured in five diameters from 3/4" to 2" in standard 250-ft. coils. Special lengths can be made available upon request but minimum quantities may apply.

FIBER GUARD™  SLIT CORRUGATED CONDUIT

 

  

Prices are subject to change without notice.  Inventory is subject to prior sale.  Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product. Not Responsible for errors in print, verify all data with us or manufacturer.  Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice. Other disclaimers may apply. Minimum order quantities may apply.