Attenuator Pads - Model # 30-AP

• Also Available 30-SAT, 30-VBC10
• The 30-AP (*) Fixed Attenuator DC-1000 MHz and the 30-SAT (*) DC Power Passive, are high end Monolithic Printed Circuit board Assembly devices. These devices are used to reduce the power of an input signal when the output signal is to strong. The 30-VBC10 Voltage Blocking Coupler is a DC-1750MHz device used to block DC in the system.

            5-1000MHz Directional Couplers   

• Also Available DCW6, DCW9, DCW12, DCW16, DCW20,DCW24,DCW27
• Provides high isolation of reflected signals to reduce unwanted images.
• Maintains constant 75-Ohm impedance.
• Indoor/Outdoor high quality zinc diecast housing.
• Anti-corrosion chromate finish.
• Provides >-90dB RFI shielding.
• Full 5-1000MHz frequency range.
• Epoxy sealed for weather resistance.

   Model # DC-412

           5-1000MHz Directional Couplers

• Also Available DC48, DC416, DC420,     DC424, DC430
• Provides high isolation of reflected signals to reduce unwanted images.
• Maintains constant 75-Ohm impedance
• Indoor/Outdoor high quality zinc diecast housing.
• Anti-corrosion chromate finish.
• Provides >-90dB RFI shielding.
• Full 5-1000MHz frequency range.
• Epoxy sealed for weather resistance.

            5-1000MHz Directional Couplers

• Also Available DCM6, DCM9, DCM12,  DCM16, DCM20, DCM24, DCM24   
• Provides high isolation of reflected signals to reduce unwanted images.
• Maintains constant 75-Ohm impedance
• Indoor/Outdoor high quality zinc diecast housing.
• Anti-corrosion chromate finish.
• Provides >-90dB RFI shielding.
• Full 5-1000MHz frequency range.
• Epoxy sealed for weather resistance.

   Model # P17-100

            5-1000 MHz Hard Line Passives

• Provides high isolation and low thru loss.
• Captive hardware to prevent loss during installation.
• Interlocking Tongue/Groove face plate.
• -100dB EMI/RFI shielding.
• Stainless steel clamp for aerial mounting.
• Fused output ports.

           5-1000 MHz Hard Line Passives

• Also Available TSP7-3
• Provides high isolation and low thru loss.
• Captive hardware to prevent loss during installation.
• Interlocking Tongue/Groove face plate.
• -100dB EMI/RFI shielding.
• Stainless steel clamp for aerial mounting.
• Fused output ports.

  Model # TDC7-8

           5-1000 MHz Hard Line Passives

• Also Available TDC7-12, TDC7-16
• Provides high isolation and low thru loss.
• Captive hardware to prevent loss during installation.
• Interlocking Tongue/Groove face plate.
• -100dB EMI/RFI shielding.
• Stainless steel clamp for aerial mounting.
• Fused output ports.

           5-1000 MHz CATV Outdoor Taps

• Designed for both strand and pedestal mounting. Interwoven Neoprene gaskets are used for maximum waterproofing and RFI shielding. These devices feature 360 aluminum housings with brass F-connectors and drip wells.

    Model # QCT4G

             5-1000 MHz CATV Outdoor Taps

• Designed for both strand and pedestal mounting. Interwoven Neoprene gaskets are used for maximum waterproofing and RFI shielding. These devices feature 360 aluminum housings with brass F-connectors and drip wells.

            5-1000 MHz CATV Outdoor Taps

• Designed for both strand and pedestal mounting. Interwoven Neoprene gaskets are used for maximum waterproofing and RFI shielding. These devices feature 360 aluminum housings with brass F-connectors and drip wells.

               Model # 30-SAT (*)

• The 30-AP (*) Fixed Attenuator DC-1000 MHz and the 30-SAT (*) DC Power Passive, are high end Monolithic Printed Circuit board Assembly devices. These devices are used to reduce the power of an input signal when the output signal is to strong. The 30-VBC10 Voltage Blocking Coupler is a DC-1750MHz device used to block DC in the system.

                   Model # 30-VBC10

• The 30-AP (*) Fixed Attenuator DC-1000 MHz and the 30-SAT (*) DC Power Passive, are high end Monolithic Printed Circuit board Assembly devices. These devices are used to reduce the power of an input signal when the output signal is to strong. The 30-VBC10 Voltage Blocking Coupler is a DC-1750MHz device used to block DC in the system.

   Model # TAP1-7

         5-1000MHz Back-Matched Drop Taps

• High quality zinc diecast case.
• Available in 7, 12, 17, and 23dB isolations.

              FOR ITEMS NOT LISTED PLEASE CALL TOLL-FREE 1-800-843-6036