CALL US TOLL FREE: 1-800-843-6036
|
VECTOR THEATER SYSTEM A GENUINE CINEMA SYSTEM
|
|
7-COAT NATURAL WOOD LACQUERED FINISH The Vector theater system is available in a choice of beautiful natural black ash or cherry wood finishes. Extra care is taken in finishing these braced and insulated 18 mm MDF cabinets. All cabinets are sanded and buffed by hand before each of the seven coats of lacquer are applied. This exacting process ensures the best looking natural wood finish possible. For the budget conscious consumer, the Vector theater loudspeakers are also offered in black ash vinyl.
|
|
Both front speakers are secured to a sleek powered subwoofer. The pedestal subwoofer ensures the LCR loudspeaker is set at a fixed height above the floor. Taking this fact into account permits a design with predictable and outstanding performance. The active subwoofer amplifier powers both subwoofers. Together, you end up with 120 watt of power performing as would one large 12" (30.5 cm) subwoofer. For even more bass presence, two subwoofers can be installed below the rear left and rear right LCR. A choice of smaller loudspeakers, the V-SAT, are available as rears or as full five LCR setup for consumers with space restrictions.
|
 LCR/SUB
COMBINATIONVector series V-LCR's are sold individually to be used as stand alone Left, Center, Right and Rear loudspeakers. Fittings are included to attach the LCR's securely on top of the subwoofer cabinets. Vector's unique V-SUB amplified pedestal subwoofers, when positioned under the LCR loudspeakers, guarantee a full range sound reproduction, with thundering bass performance extending to 36Hz with extra decibels in sound pressure level. The drivers, the crossovers and the cabinets were all designed specifically to create a high efficiency home theater system. |
|
SPECIFICATIONS |
|
NEW SPEAKER NO PRICING ISSUED AS OF 11-21-2003 |
Available in black ash (add suffix -A) and cherry wood (add suffix -C) natural wood finishes and in black vinyl.
|
SPECIFICATIONS |
| Model | System | Woofer | Dome Tweeter | Suggest Amplifier | Frequency Response | Ohms | Sensitivity 1w/1m | Volume Litres | Weight kg/lbs | Dimensions (HxWxD) mm/inches |
| V-LCR | 2 way BR | 2x13.5cm/5.25" | 25mm/1" | 35~130W | 46~21kHz | 6 | 90dB | 15 | 8.0/17/6 | 460x180x265/18.4x7.2x10.6 |
| V-SAT | 2 way BR | 13.5cm/5.25" | 25mm/1" | 35~100W | 52~21kHZ | 6 | 87dB | 9 | 5.0/11.0 | 300x180x265/12.0x7.2x10.6 |
| Model | Power | Woofer | Phase Switch | Input Impedance | Response | Auto On/Off Delay | Volume | Weight | Dimensions (HxWxD) |
| V-SUB | 120W | 20cm/8" | Yes (0º or 180º) | 200/47 k Ohm | 36~150Hz | 0.9 sec/15 min | 25 | 15.5/34.1 | 600x180x345/24x7.2x13.8 |
CALL US TOLL FREE: 1-800-843-6036
Prices Subject to Change Without Notice.
Product Design and Specifications Subject to Change Without Notice.
Vector
is a state-of-the art performer that is intrinsically well balanced.
The concept behind having identical Left, Centre, Right (LCR) and Rear
loudspeakers in a genuine home theater system is quite simple: you
want to keep the sonic image as constant as possible, while there is shared
information among the five effect channels.
Our V-LCR use a high efficiency design to maximize the
home theater experience. The bandwidth of the LCR is carefully chosen
to work with home theater receivers available on the market today.