1-800-843-6036

Click Here to Email Us

Supported Browsers IE, SAFARI, CHROME

Explosion-Proof Horn Models:

[5522] [5523] [5522D] [5523D]

INFO LISTED BELOW

Explosion-Proof Horn Models:

[5533M] [5533MD] [5545M]

INFO LISTED BELOW

DUOTRONIC® ELECTRONIC HORNS & SIRENS/EXPLOSION PROOF

The 5522 Series Horn and 5523 Series Siren are low current, high performance, high decibel signals for hazardous locations.

They can be mounted on any surface using three bolts.  Flying leads allow for quick installation.

For use where a high decibel sound is required for alert or evacuation in hazardous locations.  Typical applications include signaling for security, evacuation, power failure, and danger.  Ideal for use in factories, mines, flour mills, refineries and paint shops.

FEATURES

• Corrosion resistant electrostatic heat flowed powder epoxy gray finish
• Fitted with factory sealed 1/2" (13mm) threaded pipe nipple for quick installation

AGENCY APPROVALS

• UL Listed for Class I, Division 1 and 2, Groups B, C, D hazardous locations
• UL 464 and 1202 Listed

SPECIFICATIONS

• Speaker swivels 180ºvertically or horizontally depending on orientation of mounting bracket
• 30" (762) wire leads
• Horn frequency - 982 Hz
• Siren frequency - rises and falls from 600 to 1250 Hz every 8 seconds

TECHNICAL INFORMATION/PRICING

Cat. No.	Description	Volts	Signal Off Standby Current (Amps)	Signal On Operating Current (Amps)
5522-AQ                   dB @ 10 ft (3.05m)-109    $1399.99 EACH	Horn	24V DC	0.061	0.470
		24V AC 50/60 Hz	0.250	1.32
5522-Y6 dB @ 10 ft.(3.05 m)-109 $1399.99 EACH	Horn	120V AC 50/60 Hz	0.088	0.260
		240V AC 50/60 Hz	0.091	0.190
		125V DC	0.031	0.130
		250V DC	0.019	0.070
5523-AQ dB @ 10ft. (3.05m)-105 $1399.99 EACH	Siren	24V DC	0.061	0.470
		24V AC 50/60 Hz	0.250	1.32
5523-Y6 dB @ 10 ft. (3.05m) - 105 $1399.99 EACH	Siren	120V AC 50/60 Hz	0.088	0.260
		240V AC 50/60 Hz	0.091	0.190
		125V DC	0.031	0.130
		250V DC	0.019	0.070
Federal Signal Explosion Proof Explosion–Proof Speaker Amplifier 302X SelecTone® models 302X-024 and 302X-120-240.

5522D & 5523D SERIES:

DUOTRONIC® ELECTRONIC HORNS & SIRENS

EXPLOSION PROOF, DIODE POLARIZED

The 5522D Horn and 5523 siren are low current, high performance, high decibel signals for hazardous locations.  They are primarily intended for use in hazardous location applications requiring electrical supervision of signaling circuit field wring.  These signals may also be used for unsupervised signaling applications. 

They may be mounted on any surface using three bolts. 

For use where a high decibel sound is required for alert or evacuation in hazardous locations.  Typical application include signaling for security, fire, power failure, and danger.  Ideal for use in factories, flour mills, refineries and paint shops.

FEATURES

• Diode polarized for supervisory circuits
• Corrosion resistant electrostatic heat flowed powder epoxy gray finish
• Fitted with factory sealed 1/2" (13mm) threaded pipe nipple for quick installation

AGENCY APPROVALS

• UL Listed for Class I, Division 1 and 2, Groups B, C, and D hazardous locations
• UL 464 and 1604 Listed

SPECIFICATIONS

• Speaker swivels 180º vertically or horizontally depending on orientation of mounting bracket
• 30" (762mm) wire leads
• Horn frequency - 9.82 Hz
• Siren frequency - rises and falls from 600 to 1250 Hz every 8 seconds

TECHNICAL INFORMATION/PRICING

5545M SERIES:

Adaptatone® Remote Speaker/Amp

Explosion Proof

The Edwards 554M Hazardous Location Adaptatone Remote Speaker/Amplifier has been designed for high decibel system operation when connected to the 5540M Central Tone Generator or 5541M System Master Panel. 

Each Speaker/Amplifier operates directly from local power sources, making it possible in a single system to connect the remote Speaker/Amplifiers to local power sources of different voltages.  The unit mounts on any surface using three bolts.

Typical applications include signaling use in mining, granaries, flour mills, tankers, refineries, laboratories, spray booths, and other hazardous locations.

FEATURES

• Corrosion resistant electrostatic heat flowed epoxy finish
• Individual volume control

AGENCY APPROVALS

• UL 464 and UL 1203 Listed
• UL Listed for Class I, Division 1 and 2, Groups B, C, and D hazardous locations

SPECIFICATIONS

• Speaker swivels 180º vertically or horizontally depending on orientation of mounting bracket
• 30' (762mm) numbered wire leads
• Supplied with factory sealed 1/2" (13mm) threaded fitting for quick installation
• Heavy duty zinc cast construction

5545M SERIES TECHNICAL INFO/PRICING

ADAPTATONE® ELECTRONIC SIGNAL

EXPLOSION PROOF, TWO OUTPUTS

The Edwards 5533M Adaptatone Signal  is an explosion proof, heavy-duty industrial, tone-selectable, signaling device capable of producing volume-controlled, high-decibel tones. The signal accepts up to two contact closures and delivers two audible output signals selected from the 55 tones available. The two tones may be selected by setting miniature switches within the unit.  One of the tones can be assigned a priority status to override the other tone. 

The electrical inputs activating the Adaptatone Signal are received from field-wired, normally open contacts or from the Cat. No. 5538-4 Adaptatone Signal Actuator.  (Not suitable for hazardous locations.)

The 5533M Adaptatone mounts on any surface using three bolts.

For use where a high decibel sound is required for alert or evacuation in hazardous locations.  Typical applications include signaling use in mining, granaries, flour mills, tankers, refineries, laboratories, spray booths, and other hazardous locations.

FEATURES

• 55 tone capability - No additional tone modules needed
• Internal volume control
• Corrosion resistant heat flowed epoxy finish
• Supplied with factory sealed 1/2" (13mm) threaded fitting for quick installation

AGENCY APPROVALS

• UL 464 and 1203 Listed
• UL Listed for Class I, Division 1 and 2, Groups B, C, and D hazardous locations

SPECIFICATIONS

• Speaker swivels 180º vertically or horizontally depending on orientation of mounting bracket
• 30" (762mm) numbered wire leads
• Heavy duty zinc cast construction

TECHNICAL INFORMATION

5533MD SERIES:

ADAPTATONE® ELECTRONIC SIGNAL

EXPLOSION PROOF, DIODE POLARIZED, SINGLE OUTPUT

The Edwards 5533MD Adaptatone Signal is an explosion proof, heavy-duty industrial, tone-selectable, signaling device capable of producing volume-controlled, high-decibel tones.  The signal delivers one audible output signal selected from the 55 tones available.  The tone may be selected by setting a miniature switch within the unit.

The 5533MD  Adaptatone mounts on any surface using three bolts.

The 5533MD Adaptatone is designed hazardous location applications requiring electrical supervision of signaling circuit field wiring.  The signal may also be used for unsupervised signaling applications.  Typical applications include signaling use in mining, granaries, flour mills, tankers, refineries, laboratories, spray booths, and other hazardous locations.

FEATURES

• Stand-alone 55 tone capability - No additional tone modules needed
• Diode polarized for supervised signaling circuits
• Internal volume control
• Corrosion resistant heat flowed epoxy finish

AGENCY APPROVALS

• UL 464 and UL 1203
• UL Listed for Class I, Division 1 and 2, Groups B, C, and D hazardous locations

SPECIFICATIONS

• Speaker swivels 180º vertically or horizontally depending on orientation of mounting bracket
• 30"(762mm) numbered wire leads
• Supplied with factory sealed 1/2" (13mm) threaded fitting for quick installation
• Heavy duty zinc cast construction

TECHNICAL INFORMATION/PRICING

1-800-843-6036

Click Here to Email Us

Supported Browsers IE, SAFARI, CHROME

Industrial Sound Management

Federal Signal Air Horns Models 3H 4H 4M 6H

Industrial Amplifiers

L General Alarm Siren

Audio Routers

56 & 55 Resonating Horn

2-120 & 2-240 Omni-Directional Outdoor Warning Siren

 Industrial Intercom Paging

302X SelecTone® Explosion Proof Explosion–Proof Speaker Amplifier

DESIGNED FOR USE IN EXPLOSION-PROOF ENVIRONMENTS

Prices are subject to change without notice. Inventory is subject to prior sale. Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product.

Not Responsible for errors in print, verify all data with us or manufacturer. Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice.

Visit us at  other webs:

midsouthcable.com     midsouthelectronics.com      midsouthglobal.net

webnetcable.com            webelectrical.net                ruggednetworks.net

inetparts.com                        midsouthlighting.com

EXPLOSION PROOF SIGNALING PRODUCTS

Public Address Explosion Proof Speakers 30 & 15 WATT

FB2PSTX EXPLOSION PROOF STROBE