Corrugated conduit duct innerduct hdpe for fiber optic fiber-optic optical wire cable wires cables. Typical usage for fiber-Guard®/CR includes both buried and innerduct applications. CR can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls. A-D Technoogies duct innerduct conduit for fiber optic cable that can is direct burial.

midsouthcable.com midsouth wire and cable company

fiber optic fiber-optic wire cable protection Typical usage for fiber-Guard®/CR includes both buried and innerduct applications. CR can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls.

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160.

can be direct buried and is frequently used for short runs.

Corrugated product is commonly used as an innerduct for short pulls.

 
GENERAL INFORMATION
Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160. It is available in two standard colors, orange or black. (Other colors can be made available but minimum run quantities may apply.) Fiber-Guard®/CR is available in standard strengths of 500# tensile. (Other strengths can be made available upon request, minimums will apply.)
Features & Benefits
  • Stocked in industry standard orange color for easy identification, also available in black.
  • Rugged corrugated design is flexible, light weight yet provides excellent crush resistance.
  • Made from high-density polyethylene (HDPE).
  • Choose from 4 diameters, 1", 1-1/4", 1-1/2" and 2" to accommodate your specific cable diameter.
  • Sequential footage markings and product identification printed every 2 feet.
  • Standard lengths ranging from 250' coils to 5000' reels.
FAST AND EFFICIENT INSTALLATION
The lightweight, flexible corrugated design makes Fiber-Guard®/CR easy to handle and install. The corrugations provide excellent crush resistance for long term protection of delicate optical cables. Internal corrugations reduce surface contact between the inside wall of the conduit and the cable jacket, lowering friction while protecting the cable from high tensile stress during installation. Fiber-Guard®/CR is available with Bull-Line pull tape factory installed lowering field cable installation costs.
APPLICATION INFORMATION
Typical usage for fiber-Guard®/CR includes both buried and innerduct applications. CR can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls
MATERIAL PROPERTIES

Fiber-Guard®/CR conduit shall be made from high-density polyethylene (HDPE. The HDPE shall meet or exceed the properties listed in ASTM D-3350 for cell classification 334480 C (black minimum 2% carbon black) and E (color with UV stabilizer).
 

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160. It is available in two standard colors, orange or black. (Other colors can be made available but minimum run quantities may apply.) Fiber-Guard®/CR is available in standard strengths of 500# tensile. (Other strengths can be made available upon request, minimums will apply.)

The lightweight, flexible corrugated design makes Fiber-Guard®/CR easy to handle and install. The corrugations provide excellent crush resistance for long term protection of delicate optical cables. Internal corrugations reduce surface contact between the inside wall of the conduit and the cable jacket, lowering friction while protecting the cable from high tensile stress during installation. Fiber-Guard®/CR is available with Bull-Line pull tape factory installed lowering field cable installation costs.

Typical usage for fiber-Guard®/CR includes both buried and innerduct applications. CR can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls. Contact your A-D Technologies' Sales Representative for more information.

 innerduct duct conduit for fiber optic wire cable coupler couplers terminal adapter adapters riser rated rating

EMAIL OR CALL US FOR PRICING AND AVAILABILITY

1-800-843-6036

Click Here to Email Us

    OnLine Order

Supported Browsers IE, SAFARI, CHROME

More Innerduct & A-D Technologies Products

 

More OUTSIDE Plant Premise Specialty Innerduct HDPE Conduit Buried Duct
locate trace duct innerduct conduit PINPOINT® is a proven, reliable method for locating buried duct. The PINPOINT® wire is encased in HDPE providing a corrosion-resistant conductor. Ideal for plow, open trench or directional bores. It is extremely functional at a wide range of frequencies, compatible with industry standard locating equipment. No special tools are required to couple the duct and the PINPOINT® wire - current coupling methods can be utilized.

PINPOINT®  LOCATED BURIED DUCT

Aerial Drop duct designed for aerial applications, highway or water crossings, building to building, pole to house, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. Increase bandwidth to the home and small business with Aerial Drop Duct. Lightweight, self-supporting and small enough for pole-to-home use. Perfect for easy one-step placement of fiber optics, copper cable or coax applications with a permanent protected pathway for future cable upgrades or repairs.Aerial Drop duct is manufactured from the highest quality HDPE materials and ontains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment

Aerial Drop Duct

 

FLEX-COR AERIAL CONDUIT FIGURE 8 AERIAL CONDUIT duct figure-8 innerduct outside Minimize your aerial installation and maintenance costs with FlexCor. Strand-Guard Figure-8 is ideal for use in limited access areas such as water crossings, interstate highway crossings or in heavily wooded areas where additional cable protection is necessary. The conduit design permits easy, straight payoff for direct placement onto the pole line and allows greater flexibility for future access to the cable. Standard pole mounting hardware and A-D Technologies' Split-Lock coupler are recommended for quick, airtight installation. No special expansion couplings are necessary, as the corrugated inner liner relieves the mechanical strain caused by extreme temperature changes.

FLEX-COR AERIAL CONDUIT  FIGURE 8 AERIAL CONDUIT

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160. Protect fiber optic fiber-optic wire cable wires cables can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls. Duct conduit for fiber optic optics optical wire cable

Fiber-Guard®/CR corrugated conduit is manufactured from HDPE resin as specified in ASTM F2160.

can be direct buried and is frequently used for short runs.

Corrugated product is commonly used as an innerduct for short pulls.

 

innerduct duct conduit Fiber-Guard® Flex-Cor is a jacketed corrugated

Fiber-Guard® Flex-Cor is a jacketed corrugated
conduit designed for above ground installations

Figure 8 Aerial duct designed for aerial applications, highway or water crossings, building to building, added defense against rodent damage and gun shot pellets; easily maneuvered through heavily treed areas with one pass. High tensile strength HDPE duct with “Figure 8” construction incorporates a flooded galvanized support strand for easy one-step aerial placement of duct and strand. Figure 8 duct is manufactured from the highest quality HDPE materials and contains finely blended carbon black and antioxidants for maximum UV and thermal protection. The coextruded SILICORE® super slick permanent lining creates a pathway for easy fiber optic, power or coaxial placement, and eliminates the need for liquid lubricants in an aerial environment.

Strand-Guard® Solid Wall Figure 8

added defense against rodent damage and gun shot pellets

Fiber-Guard® Flex-Cor is a jacketed-corrugated conduit designed for above ground installations in conduit or raceways on bridges or lashed to existing aerial plant. Fiber-Guard® Flex-Cor is also ideally suited for use in direct buried transition locations or for buried services. The Fiber-Guard® Flex-Cor jacketed-corrugated design and material properties compensate for the stresses of expansion and contraction, eliminating the need for special expansion sleeves. Fiber-Guard® Flex-Cor is made of a specially formulated polyethylene resin that resists the adverse effect of sunlight assuring long life in above ground installations. The standard product is available in 1", 1-1/4", 1-1/2" and 2' diameters. The internal corrugated wall can be provided in colors for rapid route identification when installing the cables. The outer jacket is fused to the inner corrugated wall so the assembly performs as a single conduit during installation.

FIBER-GUARD FLEX-COR - FLEXIBLE CORRUGATED JACKETED CONDUIT

 conduit duct innerduct arnco duraline ad technologies Flex-Cor's dual wall construction has excellent tensile/crush resistance permitting long pulls as well as making it strong enough for use in direct buried transitions or for buried services.

 

FIBER-GUARD FLEX-COR - FLEXIBLE CORRUGATED JACKETED CONDUIT

 

Fiber-Guard® Slit is a corrugated slit conduit for use where additional protection and identification is required, such as in underground handholes. Available in bright orange color for rapid identification or aerial (UV formulated) black for use in areas where exposure to sunlight will occur. Fiber-Guard Slit is manufactured in five diameters from 3/4" to 2" in standard 250-ft. coils. Special lengths can be made available upon request but minimum quantities may apply.

FIBER GUARD™  SLIT CORRUGATED CONDUIT

 

  

 

Corrugated conduit duct innerduct hdpe for fiber optic fiber-optic optical wire cable wires cables. Typical usage for fiber-Guard®/CR includes both buried and innerduct applications. CR can be direct buried and is frequently used for short runs. Corrugated product is commonly used as an innerduct for short pulls. A-D Technoogies duct innerduct conduit for fiber optic cable that can is direct burial.

 

 

Prices are subject to change without notice.  Inventory is subject to prior sale.  Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product. Not Responsible for errors in print, verify all data with us or manufacturer.  Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice. Other disclaimers may apply. Minimum order quantities may apply.